6280 East 39th Avenue
Denver, Co 80207
Local: 303-329-0481
Email: sales@stanleyfasteners.com
Fax: 303-329-0498
Catalog : Safety Products
Note: Please make sure to let us know the best way to contact you!
Section 11: Safety Fencing and BarGards

General Purpose 12 LB. Fence

  • Mono-oriented safety fencing with horizontal openings
  • Size/Color: 4x100 Orange; 4x100 Green
  • Weight: 12 lbs
  • 48 rolls per pallet
  • Tensile Strength: MD: 240 lbs/ft TD: 90 lbs/ft
  • U.V. stabilized high density polyethylene (HDPE) with a freezing point of approximately -112F.

Items Available:
  • 3007305, Orange 12 LBS
    NEW KCP No. = 17305
  • 3007813, Greeen 12 LBS
    NEW KCP No. = 17554 


Light Duty Diamond Fence

  • Diamond mesh safety fence with smooth top and bottom
  • Size/Color: 4x50 Orange; 4x100 Green
  • Weight: 4x50/11 lbs; 4x100/23 lbs
  • 4x50/42 rolls per pallet; 4x100/20 rolls per pallet
  • Tensile Strength: MD: 1000 lbs/ft TD: 85 lbs/ft
  • Lower cost alternative to Mid Grade Diamond Fence
  • U.V. stabilized high density polyethylene (HDPE) with a freezing point of approximately -112F.

Items Available:
  • 3014744, Orange 11 LBS
    NEW KCP No. = 20655
  • 3014745, Orange 23 LBS
    NEW KCP No. = 20656 

Mid Grade Diamond Fence

  • Diamond mesh safety fence with smooth top and bottom
  • Size/Color: 4x50 Orange; 5x50 Orange
  • Weight: 4x50/14 lbs; 5x50/18 lbs
  • 30 rolls per pallet
  • Tensile Strength: MD: 160 lbs/ft TD: 100 lbs/ft
  • Heavier and more visible than Light Duty Diamond Safety Fence
  • U.V. stabilized high density polyethylene (HDPE) with a freezing point of approximately -112F.

Items Available:
  • 3007606, Orange 14 LBS
    NEW KCP No. = 17469
  • 3006612, Orange 23 LBS
    NEW KCP No. = 17198 


Heavy Duty Diamond Fence

  • Diamond mesh safety fence with smooth top and bottom
  • Size/Color: 4x50 Black; 4x50 Green; 4x50 Orange; 4x100 Orange
  • Weight: 50’/16 lbs; 100’/32 lbs
  • 48 rolls per pallet
  • Tensile Strength: MD: 180 lbs/ft TD: 175 lbs/ft
  • Strongest and heaviest diamond mesh fence
  • U.V. stabilized high density polyethylene (HDPE) with a freezing point of approximately -112F.

Items Available:
  • 3006609, BLACK 16 LBS
    NEW KCP No. = 17189
  • 3006610, GREEN 16 LBS
    NEW KCP No. = 17193
  • 3011239, ORANGE 16 LBS
    NEW KCP No. = 19632
  • 3006607, ORANGE 32 LBS
    NEW KCP No. = 17178 


Economy Fence

  • Lightweight safety fence with oval openings
  • Size/Color: 4x100 Orange
  • Weight: 8.5 lbs
  • 48 rolls per pallet
  • Used as a visual barrier for crowd control and around the job sites, etc.
  • U.V. stabilized high density polyethylene (HDPE) with a freezing point of approximately -112F. 
    Items Available:
  • 3014742, Orange 8.5 LBS
    NEW KCP No. = 20654

Erosion Control Silt Fence

  • 100 ft woven silt fence with stakes
  • Size/Color: 3x100 Black
  • Weight: 22.5 lbs
  • 25 rolls per pallet
  • Tensile Strength: MD: 20 lbs/ft TD: 20 lbs/ft
  • Woven silt fence with 42” hardwood stakes that are spaced 10 ft. apart
  • U.V. stabilized high density polyethylene (HDPE) with a freezing point of approximately -112F.

Items Available:
  • 3007594, Black 22.5 LBS
    NEW KCP No. = 17468 

BARGARD CAL-OSHA Protector Caps

  • Fits rebar #3-7, 3/8" to 7/8" diameter
  • Lightweight and chemical resistant
  • Stands up to weather and temperature conditions
  • Safety orange color provides visibility
  • Dimension: 3.5" W x 3.5" H
  • Standard package 100

Items Available:
  • 3011839, Disc-10, Rebar cap
    NEW KCP No. = 19954 


BARGARD® caps are not designed or intended to provide impact or impalement protection. They are not a substitute for covering vertical reinforcing steel with timber, as recommended by OSHA, and are not recommended for use when protection from falls is required. For additional information on acceptable methods of guarding against impact or impalement, consult OSHA CFR TITLE 29, PART 19120, ANSI A10.9-1983, and your state regulations for specific requirements.
DISC-10 meets the testing requirements of CAL OSHA Construction Safety Orders Section 1712 on impalement protection from concrete reinforcing bars (#3-9, 3/8 - 1-1/4") for heights up to 7-1/2" and 250 lbs. (CAL OSHA Approval Code #C-1716-AG) when properly installed. Failure to properly install DISC-10 will significantly decrease any impalement protection that may otherwise be provided by the DISC-10 and may result in injury. If positioning fins are missing or damaged, the DISC-10 must be discarded. For information on the requirements of guarding against impalement, consult OSHA CFR Title 29, Sect. 1928.701 et. seq.

Bargard A-5 Protector Cap

  • Fits rebar 3/8" to 3/4"
  • Also fits inside 1' ID pipe
  • BarGards available in Lime Color Only
  • Dimensions: 2.25" W x 2.5" H
  • Standard package 200
Items Available:
  • 3005547, A-5, Rebar Cap (Lime)
    NEW KCP No. = 16825 

BARGARD® caps are not designed or intended to provide impact or impalement protection. They are not a substitute for covering vertical reinforcing steel with timber, as recommended by OSHA, and are not recommended for use when protection from falls is required. For additional information on acceptable methods of guarding against impact or impalement, consult OSHA CFR TITLE 29, PART 19120, ANSI A10.9-1983, and your state regulations for specific requirements.

Bargard A-10 Protector Caps

  • Fits rebar 3/8" to 1-1/4" diameter
  • Also fits inside 1-3/4" ID pipe
  • BarGards available in Lime Color Only
  • Dimensions: 2.5" W x 3" H
  • Standard package 100

Items Available:
  • 3005543, BarGard A-10 Protector Cap (Lime)
    NEW KCP No. = 16817 

BARGARD® caps are not designed or intended to provide impact or impalement protection. They are not a substitute for covering vertical reinforcing steel with timber, as recommended by OSHA, and are not recommended for use when protection from falls is required. For additional information on acceptable methods of guarding against impact or impalement, consult OSHA CFR TITLE 29, PART 19120, ANSI A10.9-1983, and your state regulations for specific requirements.

Bargard A-20 Protector Caps

  • Fits rebar 1" to 2-1/4"
  • Dimensions: 2.75" W x 3.5: H
  • Standard package 100

Items Available:
  • 3005545, A-20, Lime rebar cap
    NEW KCP No. = 16818
  • 3005546, A-20, White rebar cap
    NEW KCP No. = 16819


BARGARD® caps are not designed or intended to provide impact or impalement protection. They are not a substitute for covering vertical reinforcing steel with timber, as recommended by OSHA, and are not recommended for use when protection from falls is required. For additional information on acceptable methods of guarding against impact or impalement, consult OSHA CFR TITLE 29, PART 19120, ANSI A10.9-1983, and your state regulations for specific requirements.



Note: Please make sure to let us know the best way to contact you!

Content © 2003 Stanley Fasteners and Shop Supply; All Rights Reserved
Web built and administered by 4L Laboratories