SYNAC Series Synthetic Air Compressor Fluids
These diester-based synthetic air compressor fluids are outstanding for applications in which the fluid is subjected to high temperature and high stress conditions over extended drain intervals. Contact our technical service line, 800-347-5343, for both fluid and seal compatibility information and for conversion procedures. Available in 4 ISO grades.
Lubriplate SYN LUBE Multi-Purpose Fluids(ISO Viscosity grades 32, 46, 68 & 100)
These polyalphaolefin(PAO) based, zinc-free fluids are recommended for many types of hydraulic systems and rotary crew and piston type air compressors. Formulated with state of the art additives, these fluids provide outstanding performance over extended drain intervals. They are also excellent for high temperature bearing, chain and turbine oil applications.
Lubriplate SYN LUBE SERIES ISO VG 150 - 680 fluids are high performance synthetic oils which meet the ever increasing demand for industrial machine applications. These fluids are 100% synthetic based products formulated with state of the art additives to enhance the already inherent outstanding performance characteristics of the base fluids.
LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 680 fluids are excellent gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures. These fluids are also excellent lubricants for gear pumps and positive displacement blowers.
LUBRIPLATE Syncool Fluids
LUBRIPLATE Syncool Fluids consist of premium synthetic polyglycolester base stocks, targeted for high performance in rotary screw and rotary vane air compressors where high operating temperatures are present. Typically, compressors with discharge air temperatures ranging from 210°F to 240°F are candidates for LUBRIPLATE Syncool Fluids. These fluids are formulated with state of the art additives to enhance the already inherent outstanding performance characteristics of the base fluids.
LUBRIPLATE Syncool Fluids are available in two (2) ISO Viscosity Grades (ISO VG 32 & ISO VG 46). In addition to air compressors, these fluids are excellent chain lubricants and high temperature bearing lubricants.
*LUBRIPLATE Syncool 32 is a direct replacement for Sullair Sullube
32 and Palatek Pallube 32
Polyalphaolefin (PA0)-Based, High Performance Fluids, Class H-1 This series of food grade fluids has been formulated with 100% PAO synthetic base fluids for a variety of demanding applications. They are outstanding lubricanst for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. Recommended for bearings, gearboxes, pumps and chains which experience very demanding conditions. Meets FDA 21 CFR 178.3570 and FDA 21 CFR 172.882 for applications where incidental contact with the edible product may occur. SFGO Ultra 220 and 460 pass 12 stages of the FZG Test.
The LUBRIPLATE SFGO ULTRA Series meets the requirements of FDA 21 CFR 178.3570 and FDA 21 CFR 172.882. All seven-viscosity grades are suitable for use in plants where incidental contact with the edible product may occur.
The LUBRIPLATE SFGO ULTRA Series may be recommended for bearings,
gearboxes, pumps and chains requiring ISO Viscosity Grades 100 through
LUBRIPLATE SYNFLUSH is a premium quality, pure synthetic fluid designed to clean and dissolve varnish/deposits found in rotary screw and reciprocating type air compressors while the compressor is in operation. It is compatible with petroleum/mineral oils as well as all LUBRIPLATE Synthetic Compressor Fluids and most other synthetic fluids. Contact us for compatibility verification.
LUBRIPLATE SYNFLUSH is also designed for flushing compressors converting from petroleum/mineral oil to synthetic fluids. The flushing procedure removes the remaining petroleum oil that is unable to be removed by draining alone as well as cleaning the compressor prior to introducing the new synthetic fluid.
LUBRIPLATE SYNFLUSH can also be used to clean hydraulic systems, gearboxes and reducers, FRL's (Airline Oilers) and close looped circulating oil systems.
Contact LUBRIPLATE @ 800-347-5343 for procedural assistance.
SFGO Series Synthetic Food Grade Fluids
These synthetic food grade oils have been formulated to meet a variety of demanding applications where traditional white mineral oils may not be desirable. These polyalphaolefin (PAO) based synthetics are outstanding lubricants for applications in which the lubricant is subject to high temperature and high stress conditions over extended drain intervals. SFGO-150, 220, 320, 460, & 680 are recommended for bearings, gearboxes, pumps and chains requiring ISO Viscosity grades 150 through 680. USDA authorized* Class H-1.
Polyalkylene Glycol based synthetic chain, bearing and gearbox lubricant specifically designed for use where elevated temperatures exist and the need for a food grade lubricant is required. For chain applications where air temperatures exceed 400°F./204°C. and up to 600°F./316°C. when not exposed to open flame or ignition source. Passes 12 stages of FZG test.
SFL Series Synthetic Food Grade Greases
These USDA authorized* Class H-1 greases provide exceptional low temperature pumpability, high shear stability, excellent water resistance and outstanding load carrying properties. Ideal for use in freezers and other cold temperature applications or in areas subject to both cold and elevated temperatures. Available in 4 densities for a variety of applications.
©2004 Fiske Brothers Refining Company. All rights reserved.